2.5″F / 1.5″R SST LIFT KIT – TOYOTA SEQUOIA 2001-2007
2001-07 TOYOTA SEQUOIA 2WD/4WD SST LIFT KIT Max Lift 2.5″F/1.5″R – Max Tire Diameter 33″ INCLUDES DIFFERENTIAL DROP SPACER KITNOTE: Rear spacer is only compatible with one of three Toyota Sequoia rear suspension designs. This spacer is intended to bolt to the frame.
About
AutoWheelZone Suspension has used proven technological engineering methods to produce a mild lift SST Suspension Lift System for the 2001-2007 Toyota Sequoia vehicle. The 2.5″ intermediate Smart Suspension Technology system fits most 2000-07 Sequoias including 2WD and 4WD models. This kit provides the owner with the opportunity to upgrade to larger wheel and tire combinations up to 33″ in diameter while retaining the great stock ride and handling characteristics. This is a complete suspension lift kit that includes powder coated steel strut extensions, front differential drop spacers, skid plate spacers and special-designed rear spring lift spacers. The SST strut extension and diff drop bracket have been designed to provide 2.5″ of front suspension lift while retaining the OEM safe suspension geometry. The rear spring spacer installs between the frame and rear spring to provide a slight rake. Unlike other kits, the AutoWheelZone 2.5″ suspension system requires no cutting or strut spring pre-loading and installs quickly and safely using the provided heavy-duty hardware. Quality step-by-step instructions are provided with every kit. Our 69-5010 SST Lift Kit for the Toyota Sequoia will get rid of that “stink bug” stance while retaining your factory ride. Toyota pickups are built around quality and AutoWheelZone has designed this lift system to retain the quality ride and handling that you expect from a Toyota. NOTE: Not for use with rear air bag suspension. NOTE: Rear spacer is only compatible with one of three Toyota Sequoia rear suspension designs. This spacer is intended to bolt to the frame. Frame variations cannot be identified by trim level or model year – please inspect the rear frame for a top spacer bolt hole provision before installing this kit. In some Sequoia applications the frame lacks that provision. If you encounter a frame without the bolt hole, contact Customer Service for instructions on how to adapt the kit for installation.
Related products
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
Works with factory lifted RAV4 TRD and Adventure EditionOffset designed fabricated heavy-duty steel plate top mount strut extensions to maintain factory alignment geometry.Tested and approved to work with Toyota Safety Sense* Allows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.*If the vehicle is equipped with active or passive safety/collision monitoring and/or avoidance systems including, but not limited to, camera- or radar-based systems, check, adjust, and calibrate the vehicle’s systems for proper aim and function.
-
2.0″ SST Lift Kit – 2015-19 Subaru Outback Allows for up to a 245/65-17 tire on a 17×8 wheel with +38 offset 2″ front lift / 1.5″ rear lift Increases ground clearance. Upgraded sway bar end-links eliminating relocation bracket flex and compliance associated with the original OE sway bar mount system.
-
2020-2024 Subaru Outback 2″ SST Lift Kit 2.0″ Front/ 1.5″ Rear Easy bolt-on installation. Front sway bar end linksOffset spacer design for correct caster/camber. Allows for 245/65-17 with no rub Generates significant amount of ground clearance at the rockers. Maintains the functional integrity of Subaru Eyesight and other new safety features. NOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.