2021-2024 FORD BRONCO 4″ SST LIFT KIT – BASE MODELS
The all-new SST Lift Kit tubular upper control arms feature optimum ball joint pivot angles as well as corrected ball joint placement to address caster/camber changes. Upper control arms also include the all-new aircraft-grade Aluminum sealed cap to keep debris out of the ball joint cup. *Not for use on Sasquatch Package-equipped vehicles, Badland, and Wildtrack equipped with Hoss 3.0 Fox shocks. Not for use on Bronco Sport.
About
AutoWheelZone is excited to announce our highly anticipated 4″ SST Lift Kits for the 2021-2024 Ford Bronco (69-21400 4″ SST Lift Kit for standard suspension Bronco & 69-21300 3″ SST Lift Kit for Sasquatch suspension equipped Bronco’s). These kits feature an easy, 100% bolt-on installation process giving the 2021-2024 Ford Bronco an improved, aggressive stance by lifting the vehicle and increasing ground clearance to run larger tires. The kit offers a slight front-to-rear rake to allow for the addition of a larger spare tire and other accessories. AutoWheelZone’s 6061-T6 billet Aluminum front spacers are designed to achieve the maximum lift height while avoiding a ball joint or tie rod bind when the suspension articulates throughout the entire range of travel on and off-road. The addition of the high-strength 4130 alloy steel preload spacer aids in the packaging of the larger-diameter tires. The kits feature two front billet Aluminum strut spacers CNC-machined for a precise fit, two high-strength steel offset rear spacers powder coated to resist the elements, and a .250″ steel heavy-duty rear track bar bracket to achieve proper suspension geometry when lifted. The all-new SST Lift Kit tubular upper control arms feature optimum ball joint pivot angles as well as corrected ball joint placement to address caster/camber changes. Upper control arms also include the all-new aircraft-grade Aluminum sealed cap to keep debris out of the ball joint cup. This Bronco lift kit is an affordable suspension upgrade for Bronco enthusiasts seeking AutoWheelZone’s renowned product quality and strength while packaging up to 37″ tall tires.
Related products
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.
-
2020-2024 Subaru Outback 2″ SST Lift Kit 2.0″ Front/ 1.5″ Rear Easy bolt-on installation. Front sway bar end linksOffset spacer design for correct caster/camber. Allows for 245/65-17 with no rub Generates significant amount of ground clearance at the rockers. Maintains the functional integrity of Subaru Eyesight and other new safety features. NOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.