3″F / 2″R SST LIFT KIT – TOYOTA TUNDRA TRD / SR5 / ROCK WARRIOR 2007-2021
2007-2021 Tundra 3 inch SST Lift Kit Max Lift: 3.0″F/2.0″R – Max Tire Dia: 33″ 2007-2021 2WD/4WD ALL -TRD, SR5, Rock Warrior Not for use on 2015-2021 Tundra TRD Pro w/ Bilstein or Fox TRD Pro shocks Includes Sway Bar Drop Brackets
About
AutoWheelZone Suspension has used proven technological engineering methods to produce a 3″ SST Suspension Lift System (P/N 69-5276) for the 2007-2021 Toyota Tundra / TRD / SR5 / Rock Warrior trucks featuring a 2.0″ Rear Block. The 3″ intermediate Smart Suspension Technology system fits all 2007-2020 Toyota Tundras / TRD / SR5 / Rock Warrior (Crew Max, Double Cab, Standard Cab), including both 2WD and 4WD models, particularly the TRD model trucks. In some cases, TRD Tundra trucks have less factory rake than non-TRD models. On some TRD model trucks, a one inch rear block is not enough rear lift to level the rear with the front after installing the 3.0″ front strut extension. This tapered 2.0″ rear block included in the 69-5276 kit will give most TRD / SR5 / Rock Warrior trucks approximately a one-half inch rear rake. This kit provides the owner with the opportunity to upgrade to larger wheel and tire combinations up to 33″ in diameter while retaining the great stock ride and handling characteristics. This is a complete suspension lift kit that includes a powder coated steel strut extension, front differential drop spacers, sway bar spacers, skid plate spacers, and 2″ rear lift block. The SST strut extension and diff drop bracket have been designed to provide 3″ of front suspension lift while retaining the OEM safe suspension geometry. Unlike other kits, the AutoWheelZone 3″ suspension system requires no cutting or strut spring pre-loading and installs quickly and safely using the provided heavy-duty hardware. Quality step-by-step instructions are provided with every kit. Our 69-5276 SST Lift Kit for the Toyota Tundra TRD / SR5 / Rock Warrior will get rid of that “stink bug” stance while lifting the truck both front and rear and retaining your factory ride. Toyota pickups are built around quality and AutoWheelZone has designed this 3″ & 2″ lift system to retain the quality ride and handling that you expect from a Toyota. NOTE: Not for use on 2015-21 Tundra TRD Pro w/ Bilstein or Fox TRD Pro shocks NOTE: It is AutoWheelZone’s position that our objective is to provide a product that levels the vehicle. Through on-going research, we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0″ difference in rake and ride height from truck to truck. TRD-equipped trucks often have less rake compared to a non-TRD truck. Measurements on some customer’s trucks have revealed as much as 1.0″ difference in the factory front end.
Related products
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.
-
2019-2023 Toyota RAV4 2″ SST Lift KitOffset designed fabricated heavy duty steel plate top mount strut extensions maintain factory alignment geometryEasy bolt on installation – no permanent modificationsTested and approved to work with Toyota Safety Sense technologiesDelivers increased ground clearance when using a 245 series tireAllows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.Sway Bar End LinksMade in USA.NOTE: Not compatible with Adventure, Wilderness Edition, TRD, and Limited models. Not compatible with any RAV4 with factory lift or Torque Vectoring AWD
-
Works with factory lifted RAV4 TRD and Adventure EditionOffset designed fabricated heavy-duty steel plate top mount strut extensions to maintain factory alignment geometry.Tested and approved to work with Toyota Safety Sense* Allows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.*If the vehicle is equipped with active or passive safety/collision monitoring and/or avoidance systems including, but not limited to, camera- or radar-based systems, check, adjust, and calibrate the vehicle’s systems for proper aim and function.
-
2.0″ SST Lift Kit – 2015-19 Subaru Outback Allows for up to a 245/65-17 tire on a 17×8 wheel with +38 offset 2″ front lift / 1.5″ rear lift Increases ground clearance. Upgraded sway bar end-links eliminating relocation bracket flex and compliance associated with the original OE sway bar mount system.