3″F / 1″R SST LIFT KIT – TOYOTA TUNDRA TRD / SR5 / ROCK WARRIOR 2007-2021
2007-2021 Tundra 3″ SST Lift Kit – Max Lift: 3.0″F/1.0″R – Max Tire Dia: 33″ 2007-2021 2WD/4WD ALL -TRD, SR5, Rock Warrior Not for use on 2015-UP Tundra TRD Pro w/ Bilstein or Fox TRD Pro shocks Includes Sway Bar Drop Brackets
About
AutoWheelZone has used proven technological engineering methods to produce a 3″ SST Suspension Lift System (P/N 69-5175) for the 2007-2021 Toyota Tundra / TRD / SR5 / Rock Warrior trucks featuring a 1.0″ Rear Block. The 3″ intermediate Smart Suspension Technology system fits all 2007-2019 Toyota Tundras / TRD / SR5 / Rock Warrior (Crew Max, Double Cab, Standard Cab), including both 2WD and 4WD models, particularly the TRD model trucks. In some cases TRD Tundra trucks have less factory rake than non-TRD models. This new 1.0″ rear block included in the 69-5175 kit will give most TRD / SR5 / Rock Warrior trucks approximately a near level stance. This kit provides the owner with the opportunity to upgrade to larger wheel and tire combinations up to 33″ in diameter while retaining the great stock ride and handling characteristics. This is a complete suspension lift kit that includes a powder coated steel strut extension, front differential drop spacers, sway bar spacers, skid plate spacers, and new 1″ rear lift block. The SST strut extension and diff drop bracket have been designed to provide 3″ of front suspension lift while retaining the OEM safe suspension geometry. Unlike other kits, the AutoWheelZone 3″ suspension system requires no cutting or strut spring pre-loading and installs quickly and safely using the provided heavy-duty hardware. Quality step-by-step instructions are provided with every kit. Our 69-5175 SST Lift Kit for the Toyota Tundra TRD / SR5 / Rock Warrior will get rid of that “stink bug” stance while lifting the truck both front and rear and retaining your factory ride. Toyota pickups are built around quality and AutoWheelZone has designed this 3″ / 1″ lift system to retain the quality ride and handling that you expect from a Toyota. NOTE: Not for use on 2015-2021 Tundra TRD Pro w/ Bilstein or Fox TRD Pro shocks NOTE: It is AutoWheelZone’s position that our objective is to provide a product that levels the vehicle. Through on-going research, we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0″ difference in rake and ride height from truck to truck. TRD-equipped trucks often have less rake compared to a non-TRD truck. Measurements on some customer’s trucks have revealed as much as 1.0″ difference in the factory front end.
Related products
-
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
-
2020-2024 Subaru Outback 2″ SST Lift Kit 2.0″ Front/ 1.5″ Rear Easy bolt-on installation. Front sway bar end linksOffset spacer design for correct caster/camber. Allows for 245/65-17 with no rub Generates significant amount of ground clearance at the rockers. Maintains the functional integrity of Subaru Eyesight and other new safety features. NOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
-
– 2.5” SST Lift Kit is specifically constructed for Super Duty Tremor Models- Allows for 35×12.50 on a 10” wide wheel with zero offset. – Max tire size with minor trimming 37×12.50- Track bar relocation bracket – Includes Radius arm drops
-
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.