3″ SST LIFT KIT – JEEP JK WRANGLER 4WD 2007-2018
Max Lift: 3.0″F / 2.0″R – Max Tire Size: 35″ 2007-17 Jeep JK Wrangler 2DR/4DR 2012-UP vehicles may require driveshaft and exhaust modifications.
About
Jeep Wrangler JK owners, the lift kit system you been waiting for is here. The AutoWheelZone 69-6000 SST Lift Kit will raise the front of your 2007-2018 Jeep JK 3.0″ and 2.0″ in the rear. Rather than replace your reliable OEM springs or shocks, we incorporated our proven spring spacer technology into this comprehensive package which allows you to retain your OEM coil springs which translates into retaining the stock ride quality. You don’t need to have to deal with a rough ride from other kits that replace your springs and shocks. This kit has it all and is done RIGHT! Tough powdercoated steel front and rear spring spacers provide the altitude adjustment while our panhard bar relocation bracket and shock extensions work together to keep that factory suspension and alignment geometry. That is very important if you want your Jeep JK to ride and handle properly. We even developed front and rear bump stop extension brackets and included them in the kit to help maintain the OEM compression travel. This rugged new Jeep SST Lift Kit comes with all necessary hardware and instructions, as well as a Lifetime Limited Warranty on our products. Installation of the AutoWheelZone 69-6000 Jeep JK Wrangler SST Lift Kit System allows for use of up to 35″ tall tires. We rigorously tested this lift kit system using 35″ tires on 18″ wheels which proved to be a nice combination even when flexing the suspension during crawling trials. NOTE: 2012-UP vehicles may require driveshaft and exhaust modifications. NOTE: Some JK vehicles “may” require aftermarket longer front sway bar end links.
Related products
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.
-
Includes DOM tube steel front upper control arms. Terrain Control Technology (TCT) maintenance-free pivot bushings. Includes HD ball joint for better durability. Heavy-duty fabricated steel rear coil spring spacers. Allows 35X12.50 tire on a 20×9 wheel with 0 offset. Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners. Improved dynamic roll control and low-speed damping. Dramatic improvement in on-road comfort and off-road performance. Optimized fitment for unobstructed suspension travel and articulation. 6061-T6 aluminum alloy shock body resists Impact to protect internal components. Smooth-honed internal shock body surface for long-term performance. 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling. Large shaft diameter provides a wide range of adjustments on adjustable shocks. Hard anodized 6061-T6 aluminum alloy billet piston. NOTE: Vehicles that are pre-lifted/leveled or that have the “off-road package” may net a smaller overall lift height ( ie 2.5” lift vs 3.5” on a non-factory lifted vehicle). Check factory height prior to installing. ** Not for use on trucks that are equipped with factory air suspension. Will not fit Ram TRX models.
-
2020-2024 Subaru Outback 2″ SST Lift Kit 2.0″ Front/ 1.5″ Rear Easy bolt-on installation. Front sway bar end linksOffset spacer design for correct caster/camber. Allows for 245/65-17 with no rub Generates significant amount of ground clearance at the rockers. Maintains the functional integrity of Subaru Eyesight and other new safety features. NOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
-
2019-2023 Toyota RAV4 2″ SST Lift KitOffset designed fabricated heavy duty steel plate top mount strut extensions maintain factory alignment geometryEasy bolt on installation – no permanent modificationsTested and approved to work with Toyota Safety Sense technologiesDelivers increased ground clearance when using a 245 series tireAllows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.Sway Bar End LinksMade in USA.NOTE: Not compatible with Adventure, Wilderness Edition, TRD, and Limited models. Not compatible with any RAV4 with factory lift or Torque Vectoring AWD