6MM WHEEL SPACERS – 139.7 6X5.5 GM 1500 2019-2024
6mm wheel spacer – 139.7 (6×5.5) GM 1500 bolt pattern. Designed to help new GM 1500 truck owners install aftermarket wheels that will not clear the new brake caliper boss. Safely provides 6mm of wheel offset without having to modify the wheel studs. Can also be used to help to correct larger, wider tire to control arm contact on some applications. Uses GM 1500 78.1 mm bore size. Can be used on many vehicles that have a 139.7 bolt pattern, but check your hub bore size before purchasing. Sold as a pair.NOTE: Your vehicle wheel center bore needs to be 106 mm in order for this product to work.
About
AutoWheelZone/Gorilla 6mm wheel spacer – 139.7 (6×5.5) GM 1500 bolt pattern. These 6mm wheel spacers are designed to help new GM 1500 truck owners install aftermarket wheels that will not clear the new brake caliper boss. Ideal for those who don’t want to have to go up to a 1″ or wider spacer just to clear the brake calipers. Safely provides 6mm of wheel offset without having to modify the wheel studs. Can also be used to help to correct larger, wider tire to control arm contact on some applications. Uses GM 1500 78.1 mm bore size. Can be used on many vehicles that have a 139.7 bolt pattern, but check your hub bore size before purchasing. Sold as a pair.
Related products
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
– Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.- PN 67-23410 works with AutoWheelZone kits of 3.5” lifts to 6” lifts.- Relocates auto-leveling headlight sensors for improved tire clearance.Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.