HIGH-CLEARANCE ANTI-INTRUSION BEAMS – FORD RANGER 2WD/ 4WD 2019-2023
High Clearance Anti-Intrusion Beams for 2019-2023 Ford Ranger 2WD/4WD. Easy installation with minor disassembly and trimming. Retain the safety and security benefits of occupant protection. Replaces the factory anti-intrusion beams. The notched design increases tire turning clearance Allows for up to a 285/70-17 tire (33″) on AutoWheelZone 3″ lift kit equipped vehicles.
About
AutoWheelZone now offers new Ford Ranger trucks a great accessory to accommodate larger wheels and tires. Our new 67-2900 Ranger replacement High-Clearance Anti-Intrusion Beams are a great solution if you want to run a larger tire without contacting the factory offset intrusion beams (aka crash bars). The anti-intrusion beams on new Ford trucks are intended for collision safety reasons. While important, the factory beams do not provide adequate room for tire clearance when using our AutoWheelZone Ranger leveling and lift kits. Our new high-clearance beams will allow you to run up to a true 33″ tall tire, a larger size tire than when using the factory beams. The all-new 67-2900 high-clearance anti-intrusion beam kit is for use on 2019-2023 Ford Ranger 2WD/4WD trucks and provides increased clearance to run a larger tire than you can with the factory bars. These new high-clearance anti-intrusion beams are precision-engineered and manufactured using heavy-duty laser cut and robot-welded steel and have been verified with Finite Element Analysis to meet the engineering specifications of the factory anti-intrusion beams. Accessory kit 67-2900 is uniquely designed for the 2019-UP Ford Ranger front suspension. This kit includes two forward and two rearward replacement high-clearance anti-intrusion beams and installs with some minor disassembly simply to remove the factory beams and install your new AutoWheelZone high-clearance anti-intrusion beams. The notched design allows for more clearance when turning with larger tires while retaining the occupant’s safety and security. This kit does require some minor disassembly and plastic trimming and can be installed in approximately 2 hours on lifted, leveled or stock current generation Ford Ranger trucks. Easy installation with minor disassembly and trimming. Retain the safety and security benefits of occupant protection. Replaces the factory anti-intrusion beams. Notched design increases tire turning clearance Allows for up to a 285/70-17 tire (33″) on AutoWheelZone 3″ lift kit equipped vehicles.
Related products
-
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.
-
4″ COIL SPRING LIFT KIT WITH FALCON SHOCKS AND RADIUS ARMS – 2023-2024 FORD SUPER DUTY F250/F350 4WD
Fits 2023-2024 Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Tubular Radius Arms correct the caster angle included in kit 49-23421.Falcon Dual Steering Stabilizer included in kit 49-23421. Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23610 – Ford Super Duty Auto-Leveling Headlight Bypass Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
Includes DOM tube steel front upper control arms. Terrain Control Technology (TCT) maintenance-free pivot bushings. Includes HD ball joint for better durability. Heavy-duty fabricated steel rear coil spring spacers. Allows 35X12.50 tire on a 20×9 wheel with 0 offset. Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners. Improved dynamic roll control and low-speed damping. Dramatic improvement in on-road comfort and off-road performance. Optimized fitment for unobstructed suspension travel and articulation. 6061-T6 aluminum alloy shock body resists Impact to protect internal components. Smooth-honed internal shock body surface for long-term performance. 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling. Large shaft diameter provides a wide range of adjustments on adjustable shocks. Hard anodized 6061-T6 aluminum alloy billet piston. NOTE: Vehicles that are pre-lifted/leveled or that have the “off-road package” may net a smaller overall lift height ( ie 2.5” lift vs 3.5” on a non-factory lifted vehicle). Check factory height prior to installing. ** Not for use on trucks that are equipped with factory air suspension. Will not fit Ram TRX models.