3″F / 2″R SST LIFT KIT – DODGE RAM 2500/3500 4WD 2003-2013
2003-13 DODGE RAM 2500/3500 4WD ONLY SST LIFT KIT (Non new radius arm trucks) Max Lift: 3.0″F/2.0″R – Maximum Tire Dia: 35″ 4WD Only 3.0″ Front Lift – 2.0″ Rear Lift Not for use on Dually and any applications with Factory Overload Springs. Not Compatible with Power Wagon.
About
AutoWheelZone Dodge Ram SST Lift Kits are the fastest, safest, least expensive way to lift your 2003-2013 Dodge Ram 2500/3500 4WD truck without compromising the factory ride or handling. Made with durable black e-coated steel, AutoWheelZone 3.0″ SST Lift coil spacers will not deteriorate or decrease ride height over time and allow you to retain the use of your factory front coil spring. Includes OEM style 2.0″ tall rear lift blocks to lift the rear along with the front, but retain a slight rake.
Related products
-
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
-
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
4″ COIL SPRING LIFT KIT WITH FALCON SHOCKS AND RADIUS ARMS – 2023-2024 FORD SUPER DUTY F250/F350 4WD
Fits 2023-2024 Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Tubular Radius Arms correct the caster angle included in kit 49-23421.Falcon Dual Steering Stabilizer included in kit 49-23421. Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23610 – Ford Super Duty Auto-Leveling Headlight Bypass Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.