2021-2024 FORD BRONCO 4″ SST LIFT KIT – BASE MODELS
The all-new SST Lift Kit tubular upper control arms feature optimum ball joint pivot angles as well as corrected ball joint placement to address caster/camber changes. Upper control arms also include the all-new aircraft-grade Aluminum sealed cap to keep debris out of the ball joint cup. *Not for use on Sasquatch Package-equipped vehicles, Badland, and Wildtrack equipped with Hoss 3.0 Fox shocks. Not for use on Bronco Sport.
About
AutoWheelZone is excited to announce our highly anticipated 4″ SST Lift Kits for the 2021-2024 Ford Bronco (69-21400 4″ SST Lift Kit for standard suspension Bronco & 69-21300 3″ SST Lift Kit for Sasquatch suspension equipped Bronco’s). These kits feature an easy, 100% bolt-on installation process giving the 2021-2024 Ford Bronco an improved, aggressive stance by lifting the vehicle and increasing ground clearance to run larger tires. The kit offers a slight front-to-rear rake to allow for the addition of a larger spare tire and other accessories. AutoWheelZone’s 6061-T6 billet Aluminum front spacers are designed to achieve the maximum lift height while avoiding a ball joint or tie rod bind when the suspension articulates throughout the entire range of travel on and off-road. The addition of the high-strength 4130 alloy steel preload spacer aids in the packaging of the larger-diameter tires. The kits feature two front billet Aluminum strut spacers CNC-machined for a precise fit, two high-strength steel offset rear spacers powder coated to resist the elements, and a .250″ steel heavy-duty rear track bar bracket to achieve proper suspension geometry when lifted. The all-new SST Lift Kit tubular upper control arms feature optimum ball joint pivot angles as well as corrected ball joint placement to address caster/camber changes. Upper control arms also include the all-new aircraft-grade Aluminum sealed cap to keep debris out of the ball joint cup. This Bronco lift kit is an affordable suspension upgrade for Bronco enthusiasts seeking AutoWheelZone’s renowned product quality and strength while packaging up to 37″ tall tires.
Related products
-
The Rear Track Bar Axle Bracket Kit is for Bronco’s with a 3″ to 4″ lift that corrects vehicle roll center, restores factory handling, and reduces body roll on lifted applications. The billet clamp works in perfect concert with the highly triangulated rear bracket to create the added strength needed under extreme off-road use.
-
Includes DOM tube steel front upper control arms. Terrain Control Technology (TCT) maintenance-free pivot bushings. Includes HD ball joint for better durability. Heavy-duty fabricated steel rear coil spring spacers. Allows 35X12.50 tire on a 20×9 wheel with 0 offset. Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners. Improved dynamic roll control and low-speed damping. Dramatic improvement in on-road comfort and off-road performance. Optimized fitment for unobstructed suspension travel and articulation. 6061-T6 aluminum alloy shock body resists Impact to protect internal components. Smooth-honed internal shock body surface for long-term performance. 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling. Large shaft diameter provides a wide range of adjustments on adjustable shocks. Hard anodized 6061-T6 aluminum alloy billet piston. NOTE: Vehicles that are pre-lifted/leveled or that have the “off-road package” may net a smaller overall lift height ( ie 2.5” lift vs 3.5” on a non-factory lifted vehicle). Check factory height prior to installing. ** Not for use on trucks that are equipped with factory air suspension. Will not fit Ram TRX models.
-
Works with factory lifted RAV4 TRD and Adventure EditionOffset designed fabricated heavy-duty steel plate top mount strut extensions to maintain factory alignment geometry.Tested and approved to work with Toyota Safety Sense* Allows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.*If the vehicle is equipped with active or passive safety/collision monitoring and/or avoidance systems including, but not limited to, camera- or radar-based systems, check, adjust, and calibrate the vehicle’s systems for proper aim and function.
-
2020-2024 Subaru Outback 2″ SST Lift Kit 2.0″ Front/ 1.5″ Rear Easy bolt-on installation. Front sway bar end linksOffset spacer design for correct caster/camber. Allows for 245/65-17 with no rub Generates significant amount of ground clearance at the rockers. Maintains the functional integrity of Subaru Eyesight and other new safety features. NOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.