6” LIFT KIT 2019-2024 RAM 2500 W/ FALCON SHOCKS AND RING AND CROSSMEMBER STANDARD OUTPUT DIESEL MOTOR
The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. *Only available for the 2500 HD Standard Output Motor and the 68RFE Transmission.Note: Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Special Note RAM TSB 03-003-23: Symptom/Vehicle Issue: Ratchet Type Click, Clicking Noise Heard In Four Wheel Drive (4WD) While Turning. Download TSB Info. Recommended driveline for the 68RFE Adams Drive Shaft SKU:ASDRAM-1350F-5GEN.
About
AutoWheelZone is excited to announce PN: 49-19610, an all-new 4-corner coil spring 6″ lift kit with Falcon 1.1 Monotube shocks for the 2019-2024 Ram 2500 HD trucks equipped with the Standard Output Cummins turbodiesel engine providing plenty of clearance for an aggressive 37×12.5 tire and up to -18 offset wheel with no rubbing; delivering a beefy, tough look.The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. This kit includes a unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case aligning the front output shaft for improved driveline angles. Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. AutoWheelZone 6″ lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty steel cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.
Related products
-
Front Coil Spring 3″ Lift/Leveling SuspensionMax Lift 3 in – Max Tire Diameter 35 in.For 2019-2024 Ram 35004-Corner Falcon 1.1 Monotube ShocksRear BlocksDiesel Motor Ram HD’s only.Note: Not compatible with Power Wagon, rear air, dually wheels or Snow Prep/Ambulance Package. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Dually applications require part number 49-19332.
-
4” (4” + 2”) kit yields 6” of total lift with factory 2” lift and AutoWheelZone’s 4” lift Delivers clearance for increased aftermarket tire sizes – up to 35×12.50 on 6-inch kit on 9″ wide wheels with 0 offsets with no trimming -18 offset will require minor trimming.The proprietary lower strut clamshell design maintains factory geometry and retains the use of the factory strut.3/16-inch-thick steel plate cross members and skid plate.Anti-torsion boxed and gusseted plate steel differential drop brackets.Includes ReadyGuard Powertrain Warranty.NOTES: Use of Auto 4 Hi feature not recommended. Not compatible with rear mono-leaf springs.
-
Fits 2017-2022 Ford Super Duty F-250 / F-350 Power Stroke® diesel 4WD.- 2020-2022 provides 8.5″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks.- 2017-2019 provides 8″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks.All-new and improved Driveline Indexing System preserves driveline angles.Tubular Radius Arms help to correct the caster angle.Max Tire 38×13.50 on 10″ wide wheel with +12 offset. Note: Single rear wheels only. Diesel trucks only -not compatible with gas engine trucks.
-
AutoWheelZone, a leader in the lifted suspension market, is proud to announce the release of our 8.5″ Coil Spring Lift Kit for 2017-2022 4WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level. 2020-2022 gives 8.5″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks2017-2019 gives 8″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube ShocksNOTE: Tremor versions will not gain the full 7″ over stock ride height and will need longer U-bolts, see note above. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower and Single rear wheels only. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.