4″ TERRAIN FLEX 8-ARM LIFT KIT WITH SST3000 SHOCKS – JEEP JK WRANGLER 4WD 2007-2018
2007-2018 JK Wrangler 4″ Lift – 2dr/4dr Includes (8) short arms Includes front track bar Includes (4) SST3000 Shocks 2012-UP vehicles may require driveshaft and exhaust modifications.
About
Professional Suspension at a Reasonable Price! AutoWheelZone Suspension is happy to announce that we have developed an 8-Arm Lift Kit category for the Jeep JK Wrangler that is made right here in the U.S.A. These exciting 8-Arm Terrain Flex Lift Kits are designed to maximize the Jeep owners on and off road experience without having to break the bank! The 69-6409 4″ 8-Arm Terrain Flex Lift kit features our new proprietary Heavy Duty DOM tube steel Control Arms with TCT – Terrain Control Technology flex joints integrated into our popular coil spring lift kits. This lift kit includes four (4) SST3000 performance shocks. The AutoWheelZone Jeep JK 4″ Terrain Flex 8-Arm Lift Kits are a great option for the Jeep owner who wants more than just a lift kit, but doesn’t require the need for an over-the-top expensive long-arm suspension system. Our new Control Arms feature our TCT – Terrain Control Technology flex joints contained in heavy duty forged housings that bolt right up in replacement of the inferior OEM Control Arms. This new 8-arm system allows the Jeep owner to have a lifted JK that rides great and performs outstanding even in the roughest terrain. If you want the best lift component offering in a kit that doesn’t break the bank, our new 8-arm SST Lift kits are exactly what you need. Available in both 4″ and 2.5″ lift heights, these kits also include important bolt-on accessories such as a special designed plate steel rear track bar bracket to correct roll center and track bar placement, a new heavy-duty front track bar and extended length sway bar end links keep your JK handling properly. AutoWheelZone 4″ Terrain Flex 8-Arm Lift Kits are designed for use on ALL Jeep JK Wrangler 2-door & 4-door vehicles and like all AutoWheelZone products, are covered by our ReadyGuard Powertrain Warranty. NOTE: 2012-UP JKs may require front driveshaft and exhaust modifications for off road use. NOTE: 4.0″ Lift – max 37″ Tires with flat fenders. 35″ with stock fenders
Related products
-
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
-
Works with factory lifted RAV4 TRD and Adventure EditionOffset designed fabricated heavy-duty steel plate top mount strut extensions to maintain factory alignment geometry.Tested and approved to work with Toyota Safety Sense* Allows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.*If the vehicle is equipped with active or passive safety/collision monitoring and/or avoidance systems including, but not limited to, camera- or radar-based systems, check, adjust, and calibrate the vehicle’s systems for proper aim and function.
-
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
-
Ford Super Duty Tremor goes even bigger with our 2.5” SST Lift Kits. Ford’s new Tremor trucks take Super Duty to another level – adding the AutoWheelZone 2.5″ SST Lift Kit.Features & Benefits:• 2.5” SST Lift Kit is specifically constructed for Super Duty Tremor Models• Allows for 37×12.50 on a 9” wide wheel with +18 offset.• Front spacers and rear blocks