4″ COIL SPRING LIFT KIT WITH FALCON SHOCKS AND RADIUS ARMS- FORD SUPER DUTY DIESEL 4WD 2017-2022 F-350 AND F-250
Fits 2017-2022 Ford Super Duty Power Stroke 4WD4″ Coil Spring Lift Kit With (4) Monotube Falcon 1.1 Shocks.Eye-catching HD Tubular Radius Arms helps to correct caster angle.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only. NOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
About
AutoWheelZone Suspension is now offering our first 4″ Coil Spring Lift Kit fitting 2017-2022 Ford Super Duty F250/F350 4WD Power Stroke® trucks with new Tubular Radius Arms. The 49-27421 includes front and rear Falcon 1.1 Monotube series performance shocks with our venerable front track bar relocation bracket, tubular radius arms, and rear fabricated blocks. This delivers an excellent alternative for lifting a F250/F350 Super Duty trucks to fit larger tires. The coil spring system allows for increased tire sizes and widths along with providing improved ground clearance on a head-turning stance! Many consider this lift height the ’sweet spot’ for Super Duty driving dynamics and maximum tire size while maintaining everyday practicality. The all-new Radius Arms are designed to correct the suspension geometry on lifted models. These new radius arms are heavy duty and are built to handle the use and abuse demanded out of Super Duty trucks. The new radius arms hold up to the abuse and surpass the factory radius arms and support gussets. The arms are formed inward, allowing for additional tire clearance, and providing the ability to install oversized tires. The direct bolt-on design promotes quick and easy installation. This optimum lift height allows for up to 37″ tall tires. The coil spring kit delivers a great ride and handling performance! The key ingredients to improving your ride are the new specially engineered coil springs teamed with Falcon shocks and track bar relocation! This combination is more than just a lift kit, this is a performance and ride-enhancing kit that will really delight consumers with how well it rides and performs both on and off-road. The AutoWheelZone 4″ Coil Spring lift kit system for 2017-2022 Ford Super Duty trucks also includes model-specific brake line extension brackets, our time-tested bump-stop extension brackets, and new front sway bar frame mount extension brackets to keep the factory sway bar in the proper position. If you want tough looks and a smooth but controlled ride, then you want the new Super Duty 4” Coil Spring Suspension Kit System.
Related products
-
Front Coil Spring 3″ Lift/Leveling SuspensionMax Lift 3 in – Max Tire Diameter 35 in.For 2019-2024 Ram 35004-Corner Falcon 1.1 Monotube ShocksRear BlocksDiesel Motor Ram HD’s only.Note: Not compatible with Power Wagon, rear air, dually wheels or Snow Prep/Ambulance Package. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Dually applications require part number 49-19332.
-
All-new 2019-2024 Ram 3500 4WD HD 6″ lift kit 6″ front with 5″ rear blocks lift kitIncludes all-new transfer case clocking ring and new heavy-duty transmission crossmember.Includes 4 Falcon 1.1 Monotube shocks tuned specifically for the Ram 3500 HD.For use on Diesel engine Ram 3500 4WD HD trucks only.Allows for up to 37×13.50 tires on 20″ x 9″ wide wheels with -18 offset.Note: Does not work with Factory Air suspension, Auto Level system (factory helper bags) HEMI Gasoline engine, dually models, Classic models, and any automatic-leveling rear air suspension models. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Special Note RAM TSB 03-003-23: Symptom/Vehicle Issue: Ratchet Type Click, Clicking Noise Heard In Four Wheel Drive (4WD) While Turning. Download TSB Info. Recommended driveline for the 68RFE Adams Drive Shaft SKU:ASDRAM-1350F-5GEN.
-
Tapered front strut spacers to correct strut angleHeavy-duty fabricated steel components utilizing 3/16″ and 1/4″ steel plateKits include carrier bearing drop bracket kit for 2-piece driveline equipped trucksFull-coverage differential skid plate constructed from 3/16″ steel plate.Includes HD alignment cam bolts for a proper front-end alignmentTire size 295/65R20 with a 20×9″ with a 0 offset wheelMax tire with trimming 37×12.50″ with a 20×9″ with a 0 offset wheel*Does not come with shocks. Kit is only for CCD equipped trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. NOTE: Does not fit 2WD, Tremor, and Raptor. Not compatible with Ford BlueCruise.
-
AutoWheelZone, a leader in the lifted suspension market, is proud to announce the release of our 8.5″ Coil Spring Lift Kit for 2017-2022 4WD Ford Super Duty F250/F350 trucks equipped with a 6.7L Power Stroke® diesel engine. This lift kit is designed to provide a heightened experience for drivers who are looking to take their vehicles to the next level. 2020-2022 gives 8.5″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube Shocks2017-2019 gives 8″ Coil Spring Lift Kit With (4) Falcon 1.1 Monotube ShocksNOTE: Tremor versions will not gain the full 7″ over stock ride height and will need longer U-bolts, see note above. Not recommended for 2WD or gas trucks. 2017-2019 ride height may be slightly lower and Single rear wheels only. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.