2021-2024 FORD BRONCO 2” F 2 1/2” R SST LIFT FOR HIGH PAYLOAD CONDITIONS
2″ premium “High Payload” SST lift kit solution for the new Ford Bronco – excludes Sasquatch packages Badlands, Wildtrak and First Edition models. Heavy-duty CNC-machined aircraft grade billet Aluminum construction. AutoWheelZone top mount strut extensions require no cutting or modifications to install. Provides the ideal 2″ of lift for a true lifted stance that maintains the factory ride and handling, increases ground clearance and allows for larger wheels and tires. 69-21210 is engineered to compensate for heavy cargo weight such as rooftop tents, tools and camping gear, etc. Note: Not for use on Sasquatch Package equipped vehicles including Badlands, Wildtrak, First Edition, and Wildtrack equipped with Hoss 3.0 Fox shocks.
About
If you are a new Ford Bronco owner and are planning to outfit your new Bronco with overland or rock crawling adventure features, AutoWheelZone has a new lift kit engineered just for you. Our new 69-21210 Ford Bronco High Payload 2″ SST lift kit has been designed to meet the needs of Bronco adventurists who typically add lots of heavy aftermarket products such as rooftop tents, tools, refrigerators, etc. This new lift kit takes our standard Ford Bronco SST lift kit and adds additional rear lift height to compensate for additional cargo weight. The 69-21210 2″ SST lift kit is engineered for use on new Ford Bronco vehicles that do not have the Sasquatch package which includes Badlands, Wildtrak and First Edition models. This kit is intended for Broncos operating regularly with payload – cargo management systems, rooftop equipment, steel bumpers, overlanding gear, oversized spare tires, etc. The kit provides approximately 2.5″ of rear lift when the vehicle is lightly loaded. The 69-21210 SST lift kit provides 2″ of lift using our popular CNC-machined aircraft-grade 6061-T6 billet Aluminum front and rear top mount spacers that are developed to help maintain the factory ride and handling. These new premium-grade spacers are designed to provide maximum lift height without creating ball joint or tie rod bind commonly found with inferior kits on the market. Our engineering team has developed the appropriate geometry to allow the suspension to work flawlessly throughout the suspension cycle and range of travel. 69-21210 is completely bolt-on and requires no modifications or cutting to install, all while providing a much improved overall aggressive stance with additional rake included to better accept heavier cargo weight. Two inches of front lift allows the new Ford Bronco owner to take advantage of the increased ground and tire clearance to run much larger wheels and tires. Our testing reveals that a 305/70R17 on a 17″ wheel with +18 offset is the maximum size tire to run with no modifications or trimming required. 35×12.50 tire can be used with minor trimming and/or front crash bar removal. (Does NOT fit Sasquatch Package equipped vehicles, Badlands, Wildtraks, First Edition)
Related products
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.
-
Fits 2023-UP Ford Super Duty Power Stroke 4WD.4″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Radius Arm Drops for correct caster angle in kit.Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23410 – Ford Super Duty Auto-Leveling Headlight 3.5”-6” Lift Bracket KitNOTE: Tremor versions will not gain the full 4 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. New auto headlight brackets are only for stock radius Arms.
-
2″ SST Lift Kit Fits 2017-2021 Kia Sportage and 2016-2021 Hyundai Tucson Provides 2″ front and 2″ rear lift Heavy-duty laser cut steel front strut extensions and aircraft-grade CNC-machined billet Aluminum rear coil spring spacers. Allows for up to a 245/65-17 size tire on an 8″ wide wheel with +38 offset comfortably with no rubbing issues. Upgraded sway bar end-links eliminating relocation bracket flex and compliance associated with the original OE sway bar mount system.
-
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.