2019-2024 RAM 3500 DIESEL 4WD 4.5” COIL SPRING LIFT KIT
All-new 2019-2024 Ram 3500 4WD HD 4.5″ lift kit 4.5-inch front with rear blocks lift kitIncludes all-new transfer case clocking ring and new heavy-duty transmission crossmember.Includes 4 Falcon 1.1 Monotube shocks tuned specifically for the Ram 3500 HD.For use on Diesel engine Ram 3500 4WD HD trucks only.Allows for up to 37×13.50 tires on 20″ x 9″ wide wheels with -18 offset.Note: Does not work with Factory Air suspension, Auto Level system (factory helper bags) HEMI Gasoline engine, dually models, Classic models, and any automatic-leveling rear air suspension models. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Special Note RAM TSB 03-003-23: Symptom/Vehicle Issue: Ratchet Type Click, Clicking Noise Heard In Four Wheel Drive (4WD) While Turning. Download TSB Info. Recommended driveline for the 68RFE Adams Drive Shaft SKU:ASDRAM-1350F-5GEN.
About
The all-new 4.5″ Coil Spring Lift Kits allow for even more ground clearance while going to a 37″ tire. Springing up to the new 4.5″ lift yields all the bells and whistles of a big 6″ kit but at a slightly lower, garage-able stance. These kits come with heavy-duty steel radius arm drop brackets, heavy-duty fabricated steel front track bar brackets, forged dropped pitman arm, sway bar relocation brackets, and bump stop extensions preventing over-compression of the included Falcon 1.1 Monotube front & rear shocks. The 4.5″ Ram HD kit includes our unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case to properly align the front output shaft for improved driveline angles. The Ram 3500 HD comes with a high-output diesel engine DIS system. Kit 49-19430 includes the new DIS re-positioning components, heavy-duty and great riding 4.5″ lift front springs, 3″ lift rear taper blocks, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front, track bar brackets, dropped cast iron pitman arm, front/rear sway bar relocation brackets, and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front/rear shocks.*Kit will not fit any models with the standard output 6.7L diesel motor, HEMI Gasoline engine, dually models, Classic models, and any automatic-leveling rear air suspension models.
Related products
-
Tapered front strut spacers to correct strut angleHeavy-duty fabricated steel components utilizing 3/16″ and 1/4″ steel plateKits include carrier bearing drop bracket kit for 2-piece driveline equipped trucksFull-coverage differential skid plate constructed from 3/16″ steel plate.Includes HD alignment cam bolts for a proper front-end alignmentTire size 295/65R20 with a 20×9″ with a 0 offset wheelMax tire with trimming 37×12.50″ with a 20×9″ with a 0 offset wheel*Does not come with shocks. Kit is only for CCD equipped trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. NOTE: Does not fit 2WD, Tremor, and Raptor. Not compatible with Ford BlueCruise.
-
– Allows for 5.75″ backspace (18-20mm Offset) on 20×9 with 35″ tires- Max tire with trimming 5.5″ backspace (10-13mm Offset) on 20×9 with 37″ tires- Includes two Falcon 1.1 monotube rear shocks- Retains factory turning radius- Allows for use of stock 20” wheels- Work with the auto adjust headlights NOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option or trucks equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS). Kits only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels at 20″ or larger are compatible (confirm fitment prior to installation).
-
4” (4” + 2”) kit yields 6” of total lift with factory 2” lift and AutoWheelZone’s 4” lift Delivers clearance for increased aftermarket tire sizes – up to 35×12.50 on 6-inch kit on 9″ wide wheels with 0 offsets with no trimming -18 offset will require minor trimming.The proprietary lower strut clamshell design maintains factory geometry and retains the use of the factory strut.3/16-inch-thick steel plate cross members and skid plate.Anti-torsion boxed and gusseted plate steel differential drop brackets.Includes ReadyGuard Powertrain Warranty.NOTES: Use of Auto 4 Hi feature not recommended. Not compatible with rear mono-leaf springs.
-
All-new 2017-2022 Ford Super Duty F250/F350 HD 4WD transfer case clocking ring and transmission crossmember kit. Includes all necessary hardware.Repositions the transfer case angle for proper drive shaft alignment.