9″ LIFT KIT – GM SILVERADO / SIERRA 1500 – 2014-2018 W/ CAST STEEL SUSPENSION
Fits 2014-UP GM 1500 trucks with OE Forged Steel front suspension Allows for up to a 37″ tall off road tire Requires at least a 9 inch wide wheel with -12 offset Retains factory turning radius, ride and handling Works with Front MagneRide Includes premium Bilstein shocks Includes new tubular steel upper control arms with TCT pivot bushings. Before purchasing – What Control Arms Does Your Truck Have?Note: Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
About
AutoWheelZone is excited to now offer a brand new 9 inch big lift kit for 2014-2018 Chevy Silverado and GMC Sierra 1500 trucks. This new lift system will work with trucks equipped with or without front MagneRide. The new 44-3491 9 inch lift kit is designed for use on 2014-2018 GM 1500 trucks equipped with the factory Forged Steel front suspension and includes new tubular upper control arms. Some of the great features our new 9 inch lift kit includes retaining the factory turning radius while minimizing track width increase to less than 0.5″ per side. This kit will allow for up to a 37″ tall tire on a 9 inch wide wheel with -12 offset. Our new “clam-shell” style lower strut extension retains use of the factory struts (both standard and front MagneRide) and does not require strut rotation. These new clam-shell brackets utilizes our TCT lower bushings to provide a precise pivot point that maintains the factory ride. The addition of our proprietary new tubular upper control arms with TCT pivot bushings.ensures prolonged upper control arm strength which is far superior to the OE stamped steel control arms. Boxed steel front/rear cross members and full width front skid plate are constructed of thick 3/16″ plate steel while also allowing for use of the OE front plastic gravel guard to protect the engine bay and retain the proper air flow as intended by the GM designers. New 1/4-inch boxed plate steel differential drop brackets feature a double gusset and boxed center rib to take the abuse of front differential torsional twisting. (Not for use on AWD applications – 2WD or 4WD only). Rear lift is achieved with are rear add-a-leaf spring and fabricated 3/16-inch thick plate steel rear lift blocks that include built-in bump stop landings and an offset pin design to properly center the axle and specific angles to the blocks to retain the proper pinion angle. This new lift system includes premium extended length Bilstein rear shocks. Notes: Fits up to a 37 tall off road tire – requires a 9 inch wide wheel with -12 offset for no rub (tire tread varies – some aggressive tires may require minor trimming. Not for use on AWD applications. Not recommended for GMC Denali 1500 with REAR MagneRide or other models with Rear MagneRide. Only Front MagneRide compatible. Includes AutoWheelZone ReadyGuard Powertrain Warranty.
Related products
-
4” (4” + 2”) kit yields 6” of total lift with factory 2” lift and AutoWheelZone’s 4” lift Delivers clearance for increased aftermarket tire sizes – up to 35×12.50 on 6-inch kit on 9″ wide wheels with 0 offsets with no trimming -18 offset will require minor trimming.The proprietary lower strut clamshell design maintains factory geometry and retains the use of the factory strut.3/16-inch-thick steel plate cross members and skid plate.Anti-torsion boxed and gusseted plate steel differential drop brackets.Includes ReadyGuard Powertrain Warranty.NOTES: Use of Auto 4 Hi feature not recommended. Not compatible with rear mono-leaf springs.
-
6″ COIL SPRING LIFT KIT WITH FALCON SHOCKS AND RADIUS ARMS – 2023-2024 FORD SUPER DUTY F250/F350 4WD
Fits 2023-2024 Ford Super Duty Power Stroke 4WD.6″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Tubular Radius Arms correct the caster angle included in kit 49-23421.Falcon Dual Steering Stabilizer included in kit 49-23421. Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23610 – Ford Super Duty Auto-Leveling Headlight Bypass Bracket KitNOTE: Tremor versions will not gain the full 6 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
Tapered front strut spacers to correct strut angleHeavy-duty fabricated steel components utilizing 3/16″ and 1/4″ steel plateKits include carrier bearing drop bracket kit for 2-piece driveline equipped trucksFull-coverage differential skid plate constructed from 3/16″ steel plate.Includes HD alignment cam bolts for a proper front-end alignmentTire size 295/65R20 with a 20×9″ with a 0 offset wheelMax tire with trimming 37×12.50″ with a 20×9″ with a 0 offset wheel*Does not come with shocks. Kit is only for CCD equipped trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. NOTE: Does not fit 2WD, Tremor, and Raptor. Not compatible with Ford BlueCruise.
-
Lift adjustable from 5″ to 6″Made to fit 2011-2019 GM 2500HD/3500HDComplete front/rear off-road suspension systemIncludes (4) Falcon 1.1 Monotube ShocksAllow for up to 35×12.50 for no rub on a 9″ wide wheel with -6 offsetUses your OEM factory torsion keysSee Details for Notes on Tow Package Compatibility.Note: Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.