2019-2024 RAM 2500 4WD HD – DRIVELINE INDEXING SYSTEM KIT
All-new 2019-2024 Ram 2500 HD 4WD transfer case clocking ring and transmission crossmember kit. Includes all necessary hardware. 2019-2024 Ram 2500 HD 4WD trucks only. For use with our AutoWheelZone 49-1960 6″ lift kit. Repositions the transfer case angle for proper drive shaft alignment.
About
2019-2024 Ram 2500 HD 4WD transfer case clocking ring and transmission crossmember kit. Includes all necessary hardware. 67-1961 addresses that inherent driveline system issue with the addition of a heavy-duty transfer case clocking [indexing] ring and new transmission crossmember. This Driveline Indexing System (DIS) combination works great with our AutoWheelZone 6‚ lift kit while re-positioning the transmission and pinion position for a smooth driving experience on or off road.
Related products
-
6″ Big Lift KitMade to fit 2020-2023 GM 2500HD/3500HD 4WD and AT4 Models.Complete front/rear off road suspension system.Includes (4) SST 3000 Series Shocks.Allow for up to 37″ tall tires.Uses Your OEM Factory Torsion Keys.Made In U.S.A.See Details for Notes on Tow Package Compatibility.Note: Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
6″ COIL SPRING LIFT KIT WITH FALCON SHOCKS AND RADIUS ARMS – 2023-2024 FORD SUPER DUTY F250/F350 4WD
Fits 2023-2024 Ford Super Duty Power Stroke 4WD.6″ Coil Spring Lift Kit with (4) Monotube Falcon 1.1 Shocks.Tubular Radius Arms correct the caster angle included in kit 49-23421.Falcon Dual Steering Stabilizer included in kit 49-23421. Bolt-on lift kit – no structural modifications required.Allows for up to 37″ tall tires on 9″ wide wheels with +18 offset.Diesel trucks with rear single-wheel only.***Trucks equipped with the “Onboard Scale” option will require the Auto-Leveling Headlight Bracket.***PN: 67-23610 – Ford Super Duty Auto-Leveling Headlight Bypass Bracket KitNOTE: Tremor versions will not gain the full 6 inches over stock ride height. Not recommended for 2WD or gas trucks. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone.
-
4” (4” + 2”) kit yields 6” of total lift with factory 2” lift and AutoWheelZone’s 4” lift Delivers clearance for increased aftermarket tire sizes – up to 35×12.50 on 6-inch kit on 9″ wide wheels with 0 offsets with no trimming -18 offset will require minor trimming.The proprietary lower strut clamshell design maintains factory geometry and retains the use of the factory strut.3/16-inch-thick steel plate cross members and skid plate.Anti-torsion boxed and gusseted plate steel differential drop brackets.Includes ReadyGuard Powertrain Warranty.NOTES: Use of Auto 4 Hi feature not recommended. Not compatible with rear mono-leaf springs.
-
– Allows for 5.75″ backspace (18-20mm Offset) on 20×9 with 35″ tires- Max tire with trimming 5.5″ backspace (10-13mm Offset) on 20×9 with 37″ tires- Includes two Falcon 1.1 monotube rear shocks- Retains factory turning radius- Allows for use of stock 20” wheels- Work with the auto adjust headlights NOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option or trucks equipped with Load-Leveling Rear Height Control Air Suspension or Adaptive Variable Suspension (AVS). Kits only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels at 20″ or larger are compatible (confirm fitment prior to installation).