3.5″ SST LIFT KIT – FORD SUPER DUTY F250/F350/F450 4WD (2-PC DRIVE SHAFT ONLY) 2011-2016
Max Lift: 3.5″F/1.0″-3.0″R – Maximum Tire Dia: 35″. 2011-2016 F-250/F-350/F-450 4WD. For trucks with two-piece drive shaft. Includes 5″ rear blo Diesel engines only. Gas engine trucks will sit nose high.
About
AutoWheelZone Suspension has engineered a line of suspension products made to fit the 2011-2016 Ford Super Duty equipped with diesel engines. Our 2011-2016 F250 4WD 3.5″F/1.5″-3.0″R SST Lift Kit provides the exact amount of front and rear lift while allowing for wheel and tire combinations up to 35″ and keeping the smooth OEM ride and drivability. This AutoWheelZone SST Lift Kit is the perfect Lift Solution for the 2011-2016 Ford Super Duty trucks with a diesel engines and a two-piece drive shaft. Does not fit the 2011-2016 Super Duty with the 6.2 liter GASOLINE engine. The 69-2531 3.5″F/3.0″R SST Lift Kit includes 3.5″ powdercoated steel coil spring spacers, sound isolators, shock extensions, sway bar frame mount spacers, bump stop extensions, carrier bearing spacer, track bar relocation bracket, radius arm drop brackets and OEM-style 5.0″ Rear Lift Blocks for a great looking mild lift system that will maintain your factory ride! NOTE: This kit is for use on trucks with a two-piece drive shaft. If you have a one-piece drive shaft, use kit 69-2538. NOTE: The lift blocks in this kit are not designed to work with aftermarket or factory add-on air spring/load leveling kits that attach to the bump stop tangs. Use of this type of air bag system will void all block warranties and can cause failure of the block bump stop tang. Diesel engines only. Gas engine trucks will sit nose high. NOTE: Tow Package vehicles may require longer U-bolts or removal of top overload springs.
Related products
-
– Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.- PN 67-23410 works with AutoWheelZone kits of 3.5” lifts to 6” lifts.- Relocates auto-leveling headlight sensors for improved tire clearance.Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.
-
2019-2023 Toyota RAV4 2″ SST Lift KitOffset designed fabricated heavy duty steel plate top mount strut extensions maintain factory alignment geometryEasy bolt on installation – no permanent modificationsTested and approved to work with Toyota Safety Sense technologiesDelivers increased ground clearance when using a 245 series tireAllows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.Sway Bar End LinksMade in USA.NOTE: Not compatible with Adventure, Wilderness Edition, TRD, and Limited models. Not compatible with any RAV4 with factory lift or Torque Vectoring AWD
-
Features and Benefits: – 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Xtreme-Duty fabricated 4130 chromoly steel upper control arms- Front inner fender bracket to fit larger tires- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. – Vehicle-specific performance-tuned Falcon 2.1 monotube dampers on all four corners.Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components.
-
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.