3.5″ SST LIFT KIT – FORD F-150 2015-2020
Fits 2015-2020 Ford F150 2WD/4WD with 1 and 2 piece driveshaft. Includes strong tubular steel Control Arms with heavy duty ball joints. Includes OEM style rear blocks for correct driveshaft angle. Solid Mount and even load distribution Will not deform or change shape No Cutting of OEM Parts or Welding Maintains Factory Ride If it needs it‚ Its in the box Allows for up to 35″ tall tires. Limited Lifetime Warranty. NOTE: Not for use on trucks that are factory pre-lifted/leveled or that have the “off-road package”. Check factory height prior to ordering or installing. Trucks with more than 22″ of wheel hub to fender lip height may require less lift.
About
New – now includes ultra strong TCT free floating pivot bushings that are self lubricating and eliminates friction. The AutoWheelZone 3.5″ SST Lift Kit is developed to give 2015-2020 F-150 owners a packaged front/rear lift option that lifts the front of the vehicle 3.5″ with 2″ in the rear. This creates a popular overall lifted stance that isn’t too high, but high enough to allow for 35×11.50 tires. These lift systems capitalize on the popularity of our tubular control arm design SST lift kits while incorporating many great advanced features. AND they are super easy to install! Like many of our popular lift kit systems, these new SST lift kits are centered around our DOM tubular steel Upper Control Arms. Crafting the right arm for the job was critical in the development of this kit design. Our team produced a superior arm that includes a 14-degree ball joint cup to insure proper geometry and alignment. This translates into long tire life as well as excellent handling. Each arm includes our proprietary AutoWheelZone ball joint – the same heavy duty ball joint used in our 3/4-ton truck lift kits. And each arm includes new one-time grease TCT polyurethane bushings. The 3.5″ of lift height is achieved using our unique offset top mount spacer design. These CNC-machined billet aerospace-grade Aluminum lift spacers feature a unique offset bolt design engineered to position the strut into the stock position. This translates into proper suspension clearance and guarantees your truck will ride like it was stock. Additionally, we include a machined billet pre-load spacer that installs between the top of the spring and the bottom of the strut hat to pre-load the spring. This also acts as a droop limiter which insures CV axles durability on 4WD models without exceeding the CV limits which works well within the OEM tolerances. To lift the rear we include OEM style 3″ tall cast rear lift blocks with built in bump stop landing pads. These blocks include dual locator pins.. For trucks with a two-piece driveshaft, we also include a carrier bearing spacer – All of this contributes to an excellent driving and handling suspension system that truly upgrades your Ford F-150 truck! NOTE: Not for use on trucks that are factory pre-lifted/leveled or that have the “off-road package”. Check factory height prior to ordering or installing. Trucks with more than 22″ of wheel hub to fender lip height may require less lift.
Related products
-
– Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.- PN 67-23410 works with AutoWheelZone kits of 3.5” lifts to 6” lifts.- Relocates auto-leveling headlight sensors for improved tire clearance.Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.
-
The Rear Track Bar Axle Bracket Kit is for Bronco’s with a 3″ to 4″ lift that corrects vehicle roll center, restores factory handling, and reduces body roll on lifted applications. The billet clamp works in perfect concert with the highly triangulated rear bracket to create the added strength needed under extreme off-road use.
-
Ford Super Duty Tremor goes even bigger with our 2.5” SST Lift Kits. Ford’s new Tremor trucks take Super Duty to another level – adding the AutoWheelZone 2.5″ SST Lift Kit.Features & Benefits:• 2.5” SST Lift Kit is specifically constructed for Super Duty Tremor Models• Allows for 37×12.50 on a 9” wide wheel with +18 offset.• Front spacers and rear blocks
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.