2.5″ SST LIFT KIT – NISSAN FRONTIER / XTERRA / EQUATOR 2005-2023
2005-2023 Nissan Frontier / Xterra & 2005-2013 Suzuki Equator 2.5″ SST Lift Kit. Max Lift 2.5-in Max Tire Diameter 32-in Easy to install No modifications required Not for Pro-4X if you want a level stance.
About
AutoWheelZone Suspension offers the most cost-effective and time-efficient way to lift your 2005-2023 2WD/4WD Nissan Frontier or Xterra’s ride height 2.5″ in the front and 1.5″ in the rear. AutoWheelZone products do not require any permanent modification to factory parts and never compress the factory springs or require cutting the strut studs. AutoWheelZone will not affect your factory OEM ride quality or comfort level. The 69-4510 kit includes two (2) SST Strut Extensions, two (2) Rear Spring Lift Shackles, four (4) Camber/Caster Alignment Bolts, and two (2) Control Arm Bump Stops. AutoWheelZone products will enhance your Nissan Frontier or Xterra’s appearance and ground clearance, which will allow use of plus-size wheel and tire combinations without any rubbing. AutoWheelZone offers a Lifetime Warranty on all of its products. From light-duty to heavy-duty trucks or SUVs, AutoWheelZone is the Smart way to lift your Nissan Frontier’s ride height. NOTE: Not for use on Pro-4X trucks if the goal is to achieve a level stance. Nismo and Pro 4X trucks may sit one inch higher in the front with 69-4510 kit. NOTE: 265/75-16 on stock rim requires no modifications. 285/75-16 on stock rims needs minor modifications in order to fit.
Related products
-
The New Bronco kit includes all-new billet upper control arms, Falcon 3.3 Series fast adjust coilovers, adjustable heavy-duty rear lower control arms, adjustable rear track bar, and heavy-duty track bar brackets for user complete control. • AutoWheelZone billet upper control arms (UCA) that are constructed from CNC-machined 6061 Aluminum. • Falcon 3.3 Series Fast Adjust Coilovers • Adjustable Heavy Duty Rear Lower Control Arms • Adjustable Rear Track Bar • Heavy Duty Track Bar Bracket • Allows for up to 37×12.50 tall tires when used on 17”x8.5” wide wheels with a +18mm offset*• Max tire size with trimming 38”x12.50” on 17”x8.5” wide wheels with a +18mm offset*NOTE: Not for use on Ford Bronco Sport or Raptor editions.
-
2019-2023 Toyota RAV4 2″ SST Lift KitOffset designed fabricated heavy duty steel plate top mount strut extensions maintain factory alignment geometryEasy bolt on installation – no permanent modificationsTested and approved to work with Toyota Safety Sense technologiesDelivers increased ground clearance when using a 245 series tireAllows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.Sway Bar End LinksMade in USA.NOTE: Not compatible with Adventure, Wilderness Edition, TRD, and Limited models. Not compatible with any RAV4 with factory lift or Torque Vectoring AWD
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
The Rear Track Bar Axle Bracket Kit is for Bronco’s with a 3″ to 4″ lift that corrects vehicle roll center, restores factory handling, and reduces body roll on lifted applications. The billet clamp works in perfect concert with the highly triangulated rear bracket to create the added strength needed under extreme off-road use.