2.0″ SST LIFT KIT – NISSAN ROGUE 2014-2019
69-4420 2.0″ SST Lift Kit – 2014-2020 Nissan Rogue 2″ front lift / 1″ rear lift Allows for up to a 245/65-17 tire on a 17×8 wheel with +38 offset
About
AutoWheelZone now offers a 2″ SST Lift Kit for the 2014-20 Nissan Rogue. With increased enthusiasm for outfitting the Nissan Rogue, AutoWheelZone has designed the industry’s first Rogue Lift Kit. This exciting new lift solution is easy to bolt-on and requires no structural modifications. Our Rogue SST lift kit includes front strut top mount spacers fabricated from heavy-duty steel and protected with a durable powder coat finish. Our threaded spacers allow for top installation of hardware, making this kit easy to install. The rear is lifted with CNC-machined aircraft-grade billet aluminum spring spacers providing 1″ of lift and includes all necessary brackets and hardware. This Nissan Rogue SST Lift kit ensures the suspension performs and handles properly on the roads or on the trails. The 69-4420 lift kit creates an exceptional improved stance that, when combined with a larger tire, results in increased ground clearance at the rockers. The AutoWheelZone Rogue SST Lift Kit installs in half the time of other kits and retains the factory camber/caster for ideal alignment courtesy of our unique offset spacer design. Allows for up to a 245/65-17 tire on a 17×8 wheel with +38 offset Lift kits are vehicle-specific engineered to the highest standards.
Related products
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
Ford’s new Tremor trucks take Super Duty to another level (69-23251) with Radius Arms making Super Duty Tremor more formidable. This innovative kit allows drivers to clear 37″ tall tires for an even more potent ride.Features & Benefits:• 2.5” SST Lift Kit is specifically constructed for Super Duty Tremor Models• Allows for 37×12.50 on a 9” wide wheel with +18 offset.• Front spacers and rear blocks• 69-23251 includes tubular radius arms
-
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
-
– Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.- PN 67-23210 works with AutoWheelZone kits of 2.5” lifts.- Relocates auto-leveling headlight sensors for improved tire clearance.Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.