RADIUS ARM BRACKET KIT – 2023-2024 FORD SUPER DUTY F250/F350 4WD
2023-2024 Ford Super Duty Radius Arm Drop Bracket Kit
About
AutoWheelZone offers 2023-2024 Ford F250/F350 Super Duty truck owners the necessary products to upgrade your current leveled or mild lifted suspension. Our 67-23350 Radius Arm Bracket Kit is derived from the products included in our new 3.5″ series lift kit systems. An integral part of the 3.5″ system are the new Radius Arm Drop Down Brackets that are designed to reposition the factory radius arms in the stock position in order to retain correct OEM suspension geometry.
Related products
-
– Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.- PN 67-23210 works with AutoWheelZone kits of 2.5” lifts.- Relocates auto-leveling headlight sensors for improved tire clearance.Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.
-
The Rear Track Bar Axle Bracket Kit is for Bronco’s with a 3″ to 4″ lift that corrects vehicle roll center, restores factory handling, and reduces body roll on lifted applications. The billet clamp works in perfect concert with the highly triangulated rear bracket to create the added strength needed under extreme off-road use.
-
2018-2024 Subaru CrossTrek 2″ Lift Kit2.0″ Front/ 1.5″ RearEasy bolt-on installationOffset spacer design for correct caster/camber.Allows for 215/75-15 with no rub – 235/75-15 with minor plastic trimmingGenerates 12″ of ground clearance at the rockers.Now compatible with LimitedSway Bar end-linksEdition with auto adjusted headlightsNOTE: Not compatible with factory lift including Subaru Outback Wilderness edition.
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.