3″ SST LIFT KIT – 2022-2024 TOYOTA TUNDRA REAR AIR 2WD/4WD
3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option ro trucks equipped with Load-Leveling Rear Height Control Air Suspension. Only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). *****Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota and required by AutoWheelZone on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer and will not be covered by AutoWheelZone ReadyGuard warranty.*****
About
The all-new 3” SST Lift for the 2022-2024 Tundra is exclusively for Tundra equipped with Load-Leveling Rear Height Control Air Suspension and Adaptive Variable Suspension (AVS). This new kit gives customers that level lift on all four corners of the air-equipped trucks. This new kit is the fast, reliable, and cost-effective way to bring the front of your vehicle level with the rear for that ideal lifted stance. Our front strut spacer eliminates the hassle, time, and concern of compressing springs while our rear airbag spacers allow the user to maintain the full range of use from the rear air system. Shock extensions, brake line spacers and brackets, and a slotted rear ride-height sensor bracket (for fine-tuning adjustments) are included in the kit. 3” SST Lift Kit Features and Benefits:- 3” Lift allows for up to 35×12.50 tall tires when used on 18″x9″ wide wheels with a +12mm offset- Maintains full operation and range of OEM load-leveling system- Retains factory turning radius- Allows for use of stock 20” wheelsNOTE: Not for use on 2022+ Tundra TRD Pro w/ Bilstein coilover shocks, the TRD rear sway bar option. Kits only work with factory 20″ wheels – will not work with factory 18″ wheels. Most aftermarket wheels are compatible (confirm fitment prior to installation). Toyota OEM lift kit cv shafts PT362-3432B and PT362-3431B are recommended by Toyota on all lifted 22-UP Tundra’s. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer.
Related products
-
3.5″ front/1.5″ rear lift. Fits 2021-UP Ford F150 2WD Includes strong tubular steel Control Arms with heavy-duty ball joints. Includes OEM style rear blocks for correct driveshaft angle. No Cutting of OEM Parts or Welding Maintains Factory Ride Limited Lifetime Warranty. NOTE: Not for use on trucks that are factory pre-lifted/leveled or that have the “off-road package” like Tremor Edition. Check factory height prior to ordering or installing. Trucks with more than 22″ of wheel hub to fender lip height may require less lift. NOTE: Not compatible with Ford BlueCruise
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
2011-2019 GM 2500 HD 2wd/4wd 3.5″ front / 2″ rear SST lift kit Allows for up to 34″ tall tires. Includes heavy-duty fabricated steel upper control arms. Best value for a premium 3.5″ SST Lift kit 2″ rear block gives more rear rake than 1″ rear block Forged Torsion Keys Falcon 1.1 Monotube Shocks Will not deform or change shape No Cutting of OEM Parts or Welding Maintains Factory Ride If it needs it – Its in the box
-
Max Lift: 4.5″ Maximum Tire Dia: 37″ 4WD Only 4.5″ Front Lift – 2.5″ Rear Lift. Now includes front and rear track bar brackets. 2019-2024 2500 4WD only. Not compatible with Auto-Ride. For use ONLY with the new body style 2500 HD 4WD trucks with rear coil springs. For Diesel Engine trucks. Not Compatible with Power Wagon. Single Cab configuration has not been validated for fitment & drivability by AutoWheelZone. Special Note RAM TSB 03-003-23: Symptom/Vehicle Issue: Ratchet Type Click, Clicking Noise Heard In Four Wheel Drive (4WD) While Turning. Download TSB Info. Recommended driveline for the 68RFE Adams Drive Shaft SKU:ASDRAM-1350F-5GEN.