FORD SUPER DUTY AUTO-LEVELING HEADLIGHT 3.5”-6” LIFT BRACKET KIT
– Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.- PN 67-23410 works with AutoWheelZone kits of 3.5” lifts to 6” lifts.- Relocates auto-leveling headlight sensors for improved tire clearance.Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.
About
AutoWheelZone is excited to release new Auto-Leveling Headlight Brackets for the 2023-2024 Ford Super-Duty Trucks equipped with the onboard scale option. AutoWheelZone’s leveling and lift kits for the 2023+ Super-Duty trucks have been a huge success but trucks with the onboard scales need a solution to keep this function working properly without illuminating warning lights. These new brackets adjust the length and position of the front auto-leveling headlight sensor to the factory radius arms. The new design moves the sensor towards the rear of the truck allowing for improved tire clearance along with adjusting the travel limits for proper function. Part number 67-23210 is designed to work with our leveling kits with a front lift up to 2.5” and the 67-23410 works on AutoWheelZone’s kits of 3.5” to 6” kits. Features & Benefits:· Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.· PN 67-23410 works with AutoWheelZone kits of 3.5” lifts to 6” lifts.· Relocates auto-leveling headlight sensors for improved tire clearance. Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms. Read full instructions to set the headlight position before completing installation.
Related products
-
The new UCAs are for Bronco’s with a 3″ to 4″ lift designed use forged chromoly bushing rod ends for extended durability, and Teflon-lined, non-bonded dual durometer bushing prevents bushing binding. On-car adjustability provides an added level of flexibility and aids in the alignment process. Includes the AutoWheelZone Heavy Duty high angle ball joint that offers the strength and reliability ball joint.
-
2.0″ SST Lift Kit – 2015-19 Subaru Outback Allows for up to a 245/65-17 tire on a 17×8 wheel with +38 offset 2″ front lift / 1.5″ rear lift Increases ground clearance. Upgraded sway bar end-links eliminating relocation bracket flex and compliance associated with the original OE sway bar mount system.
-
– 3″ Front/ 1″ Rear SST Lift Kit – Fits 2020-2024 MY GM HD 2500/3500- SST lift-specific Forged Torsion Keys – Front and rear Falcon 1.1 Monotube series shocks- Xtreme-Duty fabricated 4130 chromoly steel Upper Control Arms- Front inner fender bracket to increase larger tire clearances- Allows for no-trim 20×9 0 offset on a 35×12.50 tire. – *Max with trimming: 20×10 -18 offset – 35×12.50. Some fender well trim variances may be experienced between Silverado and Sierra models. Special Note: When setting the torsion key adjustment bolt do not exceed 27” from the wheel center to the fender edge. Exceeding this will overlift the vehicle creating a top-off condition, meaning the suspension has little to no down travel. The result is poor ride quality and premature wear of components. Max width on stock wheels is 11.5″.
-
2019-2023 Toyota RAV4 2″ SST Lift KitOffset designed fabricated heavy duty steel plate top mount strut extensions maintain factory alignment geometryEasy bolt on installation – no permanent modificationsTested and approved to work with Toyota Safety Sense technologiesDelivers increased ground clearance when using a 245 series tireAllows for up to a 245/65-17 tire on 17×8 wheel with +35 to +38 mm offset.Sway Bar End LinksMade in USA.NOTE: Not compatible with Adventure, Wilderness Edition, TRD, and Limited models. Not compatible with any RAV4 with factory lift or Torque Vectoring AWD